Wavetek MS1300 Specifiche Scaricare il pdf (Pagina 27)

100

101

1-21

Start FrequencyStart Frequency

Start Frequency

Enter the start frequency that you want to monitor for reverse

ingress. You can select from 5 to 80 MHz.

Stop FrequencyStop Frequency

Stop Frequency

Enter the stop frequency that you want to monitor for reverse

ingress. You can select from 5 to 80 MHz.

IncrementIncrement

Increment

This setting affects the increment/decrement step size when

you are tuning the ingress scan frequency using the left and

right arrows. You can select from 25kHz to 1MHz.

IMPORTANTIMPORTANT

IMPORTANT

There is a maximum of 140 measurement points. If you

select the start, stop and increment such that more than 140

points are required, your CLI-1450 will create only as many

points as possible. This means that the stop frequency may

be lower than what you desired.

DwellDwell

Dwell

This setting affects the scan rate of the ingress feature. You

can select from 1 to 25. As you increase the dwell, the scan

rate is slowed down. A slower scan rate allows for more

sensitivity when performing the ingress scan.

Check LimitCheck Limit

Check Limit

Select YES here so that the ingress level can be compared to

a defined limit. If selected, a visual pass/fail indicator is

displayed on the measurement screen.

Limit ValueLimit Value

Limit Value

Enter the limit value at which a fail indication will occur. You

can select from -45 to +60 dBmV.

Leakage Configuration

ALARM CONDITIONALARM CONDITION

ALARM CONDITION

This setting determines under what conditions the alarm is triggered.

You can disable the alarm entirely if desired. Select from the follow-

ing options:

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 100 101

Commenti su questo manuale

Nessun commento

Wavetek MS1300 Specifiche Pagina 27

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Wavetek MS1300