Wavetek 3ST Specifiche Scaricare il pdf (Pagina 45)

4-21

Use the UP and DOWN arrow keys or the numeric keypad to enter

the telemetry level (20-50

(1)

dBmV).

Forward Sweep Insertion Level

This is the level at which the 3ST inserts (transmits) sweep points.

All sweep points are inserted at the same level. Use the edit box to

set the Sweep Insertion Level to an appropriate value (This will

typically be at maximum (+50

(1)

dBmV) to over come test point loss.).

Use the UP and DOWN arrow keys or the numeric keypad to enter

the sweep insertion level (20-50

(1)

dBmV).

Include Audio Carriers

This selection allows the audio carriers to be excluded resulting in a

faster sweep. Use the UP and DOWN arrow keys to include (Yes) or

exclude (No) audio carriers.

Enable or Disable Reverse Sweep

When Reverse Sweep is enabled, both Forward and Reverse sweep-

ing can be performed. Only Forward sweeping is possible when

Reverse Sweep is disabled.

IMPORTANT: Reverse Sweep should be disabled when there are

no 3SR units being used with the Reverse Sweep

option. This will optimize the update rate of the

Forward Sweep. It should also be disabled if you

are using a 3HRV for reverse sweeping.

Select the Frequency of the Reverse Telemetry Carrier

This is the frequency at which 3SR units with the Reverse Sweep

option will transmit telemetry data. Optimally this will be in a

portion of the reverse frequency band with at least 1 MHz free, and

at best case, in the high end of the return band to avoid potential

interference from ingress.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 101 102

Nessun commento

Wavetek 3ST Specifiche Pagina 45